Style group white
Skyfold prisma
December 19, 2025
2 Minute Read time

Divide space and retain light with Skyfold Prisma

admin_admin
https://style-group.co.uk

Companies looking to divide room space while maximising light should look at the wide ranging benefits of Prisma, the leading moveable wall solution from Skyfold.

That’s the advice of Andy Gibson, Style’s director for the North, who explains that Prisma is the perfect option when looking to retain natural light in your flexible spaces.

“Prisma is part of the range of fully automatic, vertically rising, acoustic moveable walls from Skyfold,” said Andy. “At the push of a button it descends gracefully from a ceiling cavity, where, when not in use, it is housed completely out of sight.

“What makes Prisma unique is that it not only comes with glass panels, which can be frosted if desired, it tapers vertically from the ceiling which means it can fit into tight spaces with potential obstructions.

“Thanks to its slim metal frame and clean lines, it also provides unencumbered sight lines, allowing your flexible space to feel more open, even as it’s being divided.”

With an impressive 52dB acoustic rating, meetings and gatherings can take place either side of the Prisma, without disturbance.

If glass is not the desired option, the panels can be replaced with solid options with a range of finishes to complement the interior design of the room.

Key benefits include:

  • Retracts into the ceiling to conserve floor space
  • Industry-leading acoustic rating of 52 dB Rw
  • No floor or wall tracks
  • Fully automatic
  • Easy-to-use digital keypad operation
  • Quiet operation
  • Equipped with a safety obstruction sensor

Style is the exclusive UK partner to Skyfold. For more information, please contact your nearest regional Style office.

 

2026 © Style Group

Subscribe to our newsletter

Zero-Joint Technology in the Healthcare Sector

NHS England’s Health Building Note 00-09 states clinical surfaces should be “impervious, designed for easy cleaning and free of fissures and unsealed joints.”
  • Laser-bonded, adhesive-free edge, with no seam or adhesive strip
  • Designed in line with the surface characteristics HBN 00-09 describes for clinical areas
  • Formaldehyde emissions tested significantly below the EU's REACH formaldehyde limit, in effect from 6 August 2026

Why it matters

HBN 00-09 sets out these surface characteristics because unsealed joints are a recognised place for moisture and micro-organisms to collect. A genuinely joint-free edge is designed to address that specific detail.

This is a surface and edge specification, not a clinical claim. Zero-joint technology has not been evaluated or certified by NHS England, and does not claim to reduce infection rates.

Zero-Joint Technology in the Hospitality Sector

Guest-facing spaces and food-service areas face frequent hygiene inspections and heavy daily use — seamless panels help simplify housekeeping and keep finishes looking newer for longer.
  • Seamless edge finish, with no visible transition between edge and panel surface
  • 100% adhesive-free construction — no hot-melt adhesive layer to fail
  • Edge processing on all four sides, built for daily commercial use
  • Low-maintenance and easy to clean

Why it matters

Food-service and guest-facing areas are typically inspected under hygiene and housekeeping standards that look closely at surfaces and joints. A seamless, moisture-resistant edge is designed with exactly that kind of scrutiny in mind.

Every one of these sectors shares the same underlying surface problem: a bonded-strip edge is a seam, and a seam is a place where dirt, moisture or wear can concentrate in a way a continuous surface can't. Zero-joint technology addresses that one structural detail across offices, schools, healthcare and hospitality settings alike — one construction detail, one shared weak point removed, four sectors that each care about it for their own reasons.

Zero-Joint Technology in the Education Sector

Classrooms and shared facilities see high daily footfall from children and staff, so partitioning needs to withstand daily wear and support fast, thorough cleaning.
  • Seamless, adhesive-free edge with no strip to lift or wear loose over time
  • Moisture-resistant, low-maintenance surface
  • Independently tested for VOC emissions to AgBB and EN 16516

Why it matters

Schools see some of the highest footfall of any building type relative to their size, and surface durability directly affects how long fittings stay presentable between refurbishment cycles. A seam-free edge that can't lift or peel with repeated impact and cleaning is a genuinely lower-maintenance fixture over the life of the building.

Zero-Joint Technology in the Corporate Sector

Open-plan offices and meeting suites see constant daily use — surfaces need to look sharp for years without high maintenance.
  • Seamless edge finish, with no visible transition between edge and panel surface
  • 100% adhesive-free construction — no hot-melt adhesive layer to fail
  • Edge processing on all four sides, built for daily commercial use
  • Low-maintenance and easy to clean

Why it matters

An adhesive seam is one of the few places on a standard partition edge where dust, spillage residue or cleaning-product build-up can collect, simply because it isn't a flat, continuous surface. Removing that seam removes that particular weak point — a lower-maintenance fixture designed to stay looking sharp for longer.

Prefer to Write?

Fill in the form below and we’ll get back to you within one working day.

Apply Now

Fill in the form below and we’ll get back to you within one working day.

    Book a CPD with us

    Fill in the form below and we'll get back to you as quickly as we can.

    Download pdf icon

    Download

    Would you like to be contacted?