Style group white
S icon
Healthcare
|
Movable Walls

Nuffield Health

Nuffield Health is the UK’s largest healthcare charity, and at the end of 2013/start of 2014 it moved into its new head office in Epsom, Surrey. The site at the Epsom Gateway houses more than 400 Nuffield Health staff and provides the best working environment whilst enabling the charity to become more energy efficient.

SCROLL FOR MORE
https://style-group.co.uk/wp-content/uploads/1756/71/Acoustic-Glass-Nuffield-s-Health-Office-2013-3-optimised.webp https://style-group.co.uk/wp-content/uploads/1756/71/Acoustic-Glass-Nuffield-s-Health-Office-2013-4-optimised.webp https://style-group.co.uk/wp-content/uploads/1756/71/Acoustic-Glass-Nuffield-s-Health-Office-2013-5-optimised.webp https://style-group.co.uk/wp-content/uploads/1756/71/Acoustic-Glass-Nuffield-s-Health-Office-2013-2-optimised.webp https://style-group.co.uk/wp-content/uploads/1756/71/Acoustic-Glass-Nuffield-s-Health-Office-2013-1-optimised.webp

Flexible Room Configuration Meeting Environmental Aspirations

Nuffield Health is the UK’s largest healthcare charity, and at the end of 2013/start of 2014 it moved into its new head office in Epsom, Surrey. The site at the Epsom Gateway houses more than 400 Nuffield Health staff and provides the best working environment whilst enabling the charity to become more energy efficient.

Working closely with contractor, Morgan Lovell, Style was specified to deliver a flexible room configuration that would enable Nuffield Health to use its learning academy and boardroom for a wide range of activities.

A combination of four walls created a configuration which included two DORMA Variflex moveable wall systems with white magnetic board finishes, a DORMA Variflex wall with an Egger laminate finish and a DORMA Moveo Glass wall. As EPD (Environmental Product Declaration) certified moveable walls in accordance with ISO14025 and EN15804, Variflex and Moveo were perfect for Nuffield’s environmental aspirations and the clever sub-division of space meant that Nuffield would only need to heat and light the rooms in use, not the entire area. The glass wall created a long corridor with pass doors into the individual training and meeting rooms when closed, which allowed maximum natural light into the entire area.

“This is a superb example of how space can be used really flexibly,” said Julian Sargent, Style’s group managing director.“Nuffield staff have the freedom to form a T-shaped room configuration, the option to create a 32 seater conference room, two 16 seater rooms or open the entire space up into 1 very large area.

“By integrating a glass Moveo wall we also maximised the light, and the white boards on the Variflex system are a great addition which is why that finish is proving so popular in offices and training centres.

Location: Epsom
Contractor: Morgan Lovell
Architect: none

Rooms/usage:

  • Learning academy and boardroom / head office.
  • Products solid panel VARIFLEX manual with EGGER Laminate (quite unusual) – not used much.
  • One of meeting rooms was DORMA VARIFLEX magnetic whiteboard.
  • In the learning academy DORMA VARIFLEX magnetic whiteboard.
  • Learning academy MOVEO Glass to form the front facade 50dB glass (all 49 or 50dB).
  • T-shaped wall – etching by them.
  • 2 rooms are individual but the moveo glass and variflex create a T shape with corridor.
  • 32 seat room large room, then Variflex forms 2 16 seat rooms or open it all up and create a much larger area.
  • Special requirements: Finish

    READY TO REDEFINE THE SOUND OF YOUR SPACE?

    Talk to us about your acoustic goals — we’ll help you design a solution that sounds as good as it looks. 

    2026 © Style Group

    Subscribe to our newsletter

    Zero-Joint Technology in the Healthcare Sector

    NHS England’s Health Building Note 00-09 states clinical surfaces should be “impervious, designed for easy cleaning and free of fissures and unsealed joints.”
    • Laser-bonded, adhesive-free edge, with no seam or adhesive strip
    • Designed in line with the surface characteristics HBN 00-09 describes for clinical areas
    • Formaldehyde emissions tested significantly below the EU's REACH formaldehyde limit, in effect from 6 August 2026

    Why it matters

    HBN 00-09 sets out these surface characteristics because unsealed joints are a recognised place for moisture and micro-organisms to collect. A genuinely joint-free edge is designed to address that specific detail.

    This is a surface and edge specification, not a clinical claim. Zero-joint technology has not been evaluated or certified by NHS England, and does not claim to reduce infection rates.

    Zero-Joint Technology in the Hospitality Sector

    Guest-facing spaces and food-service areas face frequent hygiene inspections and heavy daily use — seamless panels help simplify housekeeping and keep finishes looking newer for longer.
    • Seamless edge finish, with no visible transition between edge and panel surface
    • 100% adhesive-free construction — no hot-melt adhesive layer to fail
    • Edge processing on all four sides, built for daily commercial use
    • Low-maintenance and easy to clean

    Why it matters

    Food-service and guest-facing areas are typically inspected under hygiene and housekeeping standards that look closely at surfaces and joints. A seamless, moisture-resistant edge is designed with exactly that kind of scrutiny in mind.

    Every one of these sectors shares the same underlying surface problem: a bonded-strip edge is a seam, and a seam is a place where dirt, moisture or wear can concentrate in a way a continuous surface can't. Zero-joint technology addresses that one structural detail across offices, schools, healthcare and hospitality settings alike — one construction detail, one shared weak point removed, four sectors that each care about it for their own reasons.

    Zero-Joint Technology in the Education Sector

    Classrooms and shared facilities see high daily footfall from children and staff, so partitioning needs to withstand daily wear and support fast, thorough cleaning.
    • Seamless, adhesive-free edge with no strip to lift or wear loose over time
    • Moisture-resistant, low-maintenance surface
    • Independently tested for VOC emissions to AgBB and EN 16516

    Why it matters

    Schools see some of the highest footfall of any building type relative to their size, and surface durability directly affects how long fittings stay presentable between refurbishment cycles. A seam-free edge that can't lift or peel with repeated impact and cleaning is a genuinely lower-maintenance fixture over the life of the building.

    Zero-Joint Technology in the Corporate Sector

    Open-plan offices and meeting suites see constant daily use — surfaces need to look sharp for years without high maintenance.
    • Seamless edge finish, with no visible transition between edge and panel surface
    • 100% adhesive-free construction — no hot-melt adhesive layer to fail
    • Edge processing on all four sides, built for daily commercial use
    • Low-maintenance and easy to clean

    Why it matters

    An adhesive seam is one of the few places on a standard partition edge where dust, spillage residue or cleaning-product build-up can collect, simply because it isn't a flat, continuous surface. Removing that seam removes that particular weak point — a lower-maintenance fixture designed to stay looking sharp for longer.

    Prefer to Write?

    Fill in the form below and we’ll get back to you within one working day.

    Apply Now

    Fill in the form below and we’ll get back to you within one working day.

      Book a CPD with us

      Fill in the form below and we'll get back to you as quickly as we can.

      Download pdf icon

      Download

      Would you like to be contacted?