Style group white
S icon
Education
|
Skyfold Walls

Glasgow University

At the push of a button it descends gracefully into position, dividing the lecture theatre into two separate rooms with an incredible 51dB acoustic rating, allowing lectures and events to take place either side, completely undisturbed.

SCROLL FOR MORE
https://style-group.co.uk/wp-content/uploads/1756/72/doors-closed-1000pxl.webp https://style-group.co.uk/wp-content/uploads/1756/72/DOORS-FOLDING-1000pxl.webp https://style-group.co.uk/wp-content/uploads/1756/71/BACK-OF-ROOM-1000pxl.webp https://style-group.co.uk/wp-content/uploads/1756/72/Screenshot-2023-03-22-092541-1000pxl5.webp

Products

Skyfold

Location

Glasgow

Architect

HLM

Contractor

Multiplex

Automatic Moveable Wall at Glasgow University

Glasgow is a world top 100 university with one of the widest ranges of courses in the UK. Ranked as one of the world’s best student locations, Glasgow is the UK’s third largest city and the University continues to invest in its student facilities – most recently with the new state-of-the-art James McCune Smith learning and teaching hub which opened in 2021.

Working with architects, HLM, and contractor, Multiplex, Style was specified to install a fully automatic, Skyfold moveable wall to divide the University’s lecture theatre.

Skyfold is a world-leading vertically rising moveable wall which is housed in a ceiling cavity. This means it is completely hidden from view, and takes up no room space at all, when not in use.
At the push of a button it descends gracefully into position, dividing the lecture theatre into two separate rooms with an incredible 51dB acoustic rating, allowing lectures and events to take place either side, completely undisturbed.

Watch video>>

“When this moveable wall was installed, it was one of the biggest in the UK,” said David Louden, Style’s director for Scotland.

“It takes less than 5 minutes to divide the room and as you watch it descend into position it really is a truly magnificent mechanism for dividing space. Its ability to cater for stepped lecture theatres is also a huge benefit as that can be a limiting factor with many other types of moveable wall.

“Once in situ, the acoustic seals are automatically applied to the correct pressure, offering the optimum acoustic barrier, and the painted steel finish is the perfect complement to the bright, open atmosphere of the room.

“With space being an issue for all Universities, this is a superb solution for quickly dividing the lecture theatre into two, enabling them to cater for varying numbers of students and classes each week.”

Style is the exclusive UK partner to Skyfold, Dorma Huppe and SWG, offering an extensive portfolio of moveable, folding and partitioning walls for all requirements and budgets.
For more case studies from the education sector, please visit the sectors page on our website.

READY TO REDEFINE THE SOUND OF YOUR SPACE?

Talk to us about your acoustic goals — we’ll help you design a solution that sounds as good as it looks. 

2026 © Style Group

Subscribe to our newsletter

Zero-Joint Technology in the Healthcare Sector

NHS England’s Health Building Note 00-09 states clinical surfaces should be “impervious, designed for easy cleaning and free of fissures and unsealed joints.”
  • Laser-bonded, adhesive-free edge, with no seam or adhesive strip
  • Designed in line with the surface characteristics HBN 00-09 describes for clinical areas
  • Formaldehyde emissions tested significantly below the EU's REACH formaldehyde limit, in effect from 6 August 2026

Why it matters

HBN 00-09 sets out these surface characteristics because unsealed joints are a recognised place for moisture and micro-organisms to collect. A genuinely joint-free edge is designed to address that specific detail.

This is a surface and edge specification, not a clinical claim. Zero-joint technology has not been evaluated or certified by NHS England, and does not claim to reduce infection rates.

Zero-Joint Technology in the Hospitality Sector

Guest-facing spaces and food-service areas face frequent hygiene inspections and heavy daily use — seamless panels help simplify housekeeping and keep finishes looking newer for longer.
  • Seamless edge finish, with no visible transition between edge and panel surface
  • 100% adhesive-free construction — no hot-melt adhesive layer to fail
  • Edge processing on all four sides, built for daily commercial use
  • Low-maintenance and easy to clean

Why it matters

Food-service and guest-facing areas are typically inspected under hygiene and housekeeping standards that look closely at surfaces and joints. A seamless, moisture-resistant edge is designed with exactly that kind of scrutiny in mind.

Every one of these sectors shares the same underlying surface problem: a bonded-strip edge is a seam, and a seam is a place where dirt, moisture or wear can concentrate in a way a continuous surface can't. Zero-joint technology addresses that one structural detail across offices, schools, healthcare and hospitality settings alike — one construction detail, one shared weak point removed, four sectors that each care about it for their own reasons.

Zero-Joint Technology in the Education Sector

Classrooms and shared facilities see high daily footfall from children and staff, so partitioning needs to withstand daily wear and support fast, thorough cleaning.
  • Seamless, adhesive-free edge with no strip to lift or wear loose over time
  • Moisture-resistant, low-maintenance surface
  • Independently tested for VOC emissions to AgBB and EN 16516

Why it matters

Schools see some of the highest footfall of any building type relative to their size, and surface durability directly affects how long fittings stay presentable between refurbishment cycles. A seam-free edge that can't lift or peel with repeated impact and cleaning is a genuinely lower-maintenance fixture over the life of the building.

Zero-Joint Technology in the Corporate Sector

Open-plan offices and meeting suites see constant daily use — surfaces need to look sharp for years without high maintenance.
  • Seamless edge finish, with no visible transition between edge and panel surface
  • 100% adhesive-free construction — no hot-melt adhesive layer to fail
  • Edge processing on all four sides, built for daily commercial use
  • Low-maintenance and easy to clean

Why it matters

An adhesive seam is one of the few places on a standard partition edge where dust, spillage residue or cleaning-product build-up can collect, simply because it isn't a flat, continuous surface. Removing that seam removes that particular weak point — a lower-maintenance fixture designed to stay looking sharp for longer.

Prefer to Write?

Fill in the form below and we’ll get back to you within one working day.

Apply Now

Fill in the form below and we’ll get back to you within one working day.

    Book a CPD with us

    Fill in the form below and we'll get back to you as quickly as we can.

    Download pdf icon

    Download

    Would you like to be contacted?