Style group white
S icon
Education
|
Multiroll Partitions

King’s Road Primary School

Moveable wall expert Style was called upon to divide the sports hall with an affordable, yet highly effective, solution. In response, Style recommended their Multiroll curtain partitioning system.

SCROLL FOR MORE
https://style-group.co.uk/wp-content/uploads/1756/71/IMG-20240212-074224-1000pxl.webp https://style-group.co.uk/wp-content/uploads/1756/72/Multiroll-Kings-Rd-School-1000pxl.webp https://style-group.co.uk/wp-content/uploads/1756/71/IMG-20240212-074434-1000pxl.webp https://style-group.co.uk/wp-content/uploads/1756/71/IMG-20240212-074107-1000pxl.webp

Products

Multiroll Walls

Location

Dunfermline, Scotland

Dunfermline School Divides Hall with Curtain Partitioning System

King’s Road Primary School in Dunfermline houses 19 classrooms, a nursery, 3 general purpose rooms, an assembly/dining hall/gymnasium and office accommodation. The building is single storey, features a large, enclosed courtyard and is fully accessible to wheelchairs.

Moveable wall expert Style was called upon to divide the sports hall with an affordable, yet highly effective, solution. In response, Style recommended their Multiroll curtain partitioning system.

Taking up zero floor space, the Multiroll is installed into the ceiling cavity, either mounted in the beam area of the roof or invisibly fitted between a suspended ceiling. Operated at the press of a button, the fabric-lined divide unfurls from above, lowering to create a safe separation for large, open spaces such as gyms and sports halls.

If required, a Multiroll can be fitted with a sound-absorbing, non-woven fabric to provide enhanced noise insulation, whilst user welfare is assured with each system coming with German TÜV-tested safety as standard. Available in a multitude of colours, the Multiroll enhances any interior décor.

“King’s Road school originally had a sliding moveable wall in the sports hall,” explains Angela McGowan, sales director at Style Scotland, “but it was quite an old system and it had become difficult to move the panels in and out of the parking bay.

“Because of the height and weight of the panels, and the existing structural support, it was just not feasible to install a modern sliding wall system, but the Multiroll offered the perfect solution, requiring only support along the linear length, which was available.

“Maximising use of the space, the new Multiroll allows staff at the King’s Road school to quickly create two areas where different classes can gather to enjoy separate activities.”

Style is the UK’s leading supplier of moveable wall systems, offering technologically advanced solutions for almost any location, including horizontal sliding and folding partitions, the vertical-rising Skyfold, as well as the Multiroll.

READY TO REDEFINE THE SOUND OF YOUR SPACE?

Talk to us about your acoustic goals — we’ll help you design a solution that sounds as good as it looks. 

2026 © Style Group

Subscribe to our newsletter

Zero-Joint Technology in the Healthcare Sector

NHS England’s Health Building Note 00-09 states clinical surfaces should be “impervious, designed for easy cleaning and free of fissures and unsealed joints.”
  • Laser-bonded, adhesive-free edge, with no seam or adhesive strip
  • Designed in line with the surface characteristics HBN 00-09 describes for clinical areas
  • Formaldehyde emissions tested significantly below the EU's REACH formaldehyde limit, in effect from 6 August 2026

Why it matters

HBN 00-09 sets out these surface characteristics because unsealed joints are a recognised place for moisture and micro-organisms to collect. A genuinely joint-free edge is designed to address that specific detail.

This is a surface and edge specification, not a clinical claim. Zero-joint technology has not been evaluated or certified by NHS England, and does not claim to reduce infection rates.

Zero-Joint Technology in the Hospitality Sector

Guest-facing spaces and food-service areas face frequent hygiene inspections and heavy daily use — seamless panels help simplify housekeeping and keep finishes looking newer for longer.
  • Seamless edge finish, with no visible transition between edge and panel surface
  • 100% adhesive-free construction — no hot-melt adhesive layer to fail
  • Edge processing on all four sides, built for daily commercial use
  • Low-maintenance and easy to clean

Why it matters

Food-service and guest-facing areas are typically inspected under hygiene and housekeeping standards that look closely at surfaces and joints. A seamless, moisture-resistant edge is designed with exactly that kind of scrutiny in mind.

Every one of these sectors shares the same underlying surface problem: a bonded-strip edge is a seam, and a seam is a place where dirt, moisture or wear can concentrate in a way a continuous surface can't. Zero-joint technology addresses that one structural detail across offices, schools, healthcare and hospitality settings alike — one construction detail, one shared weak point removed, four sectors that each care about it for their own reasons.

Zero-Joint Technology in the Education Sector

Classrooms and shared facilities see high daily footfall from children and staff, so partitioning needs to withstand daily wear and support fast, thorough cleaning.
  • Seamless, adhesive-free edge with no strip to lift or wear loose over time
  • Moisture-resistant, low-maintenance surface
  • Independently tested for VOC emissions to AgBB and EN 16516

Why it matters

Schools see some of the highest footfall of any building type relative to their size, and surface durability directly affects how long fittings stay presentable between refurbishment cycles. A seam-free edge that can't lift or peel with repeated impact and cleaning is a genuinely lower-maintenance fixture over the life of the building.

Zero-Joint Technology in the Corporate Sector

Open-plan offices and meeting suites see constant daily use — surfaces need to look sharp for years without high maintenance.
  • Seamless edge finish, with no visible transition between edge and panel surface
  • 100% adhesive-free construction — no hot-melt adhesive layer to fail
  • Edge processing on all four sides, built for daily commercial use
  • Low-maintenance and easy to clean

Why it matters

An adhesive seam is one of the few places on a standard partition edge where dust, spillage residue or cleaning-product build-up can collect, simply because it isn't a flat, continuous surface. Removing that seam removes that particular weak point — a lower-maintenance fixture designed to stay looking sharp for longer.

Prefer to Write?

Fill in the form below and we’ll get back to you within one working day.

Apply Now

Fill in the form below and we’ll get back to you within one working day.

    Book a CPD with us

    Fill in the form below and we'll get back to you as quickly as we can.

    Download pdf icon

    Download

    Would you like to be contacted?