Style group white
S icon
Education
|

Bohunt School

Bohunt School in Wokingham opened in 2016 and is run by the Bohunt Education Trust (BET) – a dynamic learning community whose ethos is encapsulated by three simple words: enjoy, respect and achieve. Learning is engaging and challenging and Bohunt’s blend of academic rigour and holistic development has been central to a drive to develop its young people into […]

SCROLL FOR MORE
https://style-group.co.uk/wp-content/uploads/1756/72/P1010213.webp https://style-group.co.uk/wp-content/uploads/1756/72/P1010196.webp https://style-group.co.uk/wp-content/uploads/1756/72/P1010197.webp https://style-group.co.uk/wp-content/uploads/1756/72/P1010192.webp https://style-group.co.uk/wp-content/uploads/1756/72/P1010191.webp https://style-group.co.uk/wp-content/uploads/1756/72/P1010181.webp https://style-group.co.uk/wp-content/uploads/1756/72/P1010172.webp https://style-group.co.uk/wp-content/uploads/1756/72/P1010171.webp https://style-group.co.uk/wp-content/uploads/1756/72/P1010228.webp

Newly Built Secondary School Enjoys Flexible Space in Main School Hall

Bohunt School in Wokingham opened in 2016 and is run by the Bohunt Education Trust (BET) – a dynamic learning community whose ethos is encapsulated by three simple words: enjoy, respect and achieve.
Learning is engaging and challenging and Bohunt’s blend of academic rigour and holistic development has been central to a drive to develop its young people into ‘game changers’, with the skills, qualities and drive to achieve their dreams and ambitions.
As part of a £25 million project, Style was specified to create a flexible room configuration in the main hall in this new, state-of-the-art secondary school. In order for this installation to work the contractor, Dawnus Construction Holdings, had a specific requirement to have a narrow stacking mechanism in order for the operable wall to fit in with the room’s structure.
With this in mind, Style worked with Dawnus Construction and architects, Re-Format LLP, to install a DORMA Variflex operable wall that divides the hall on the ground floor of the building. This particular moveable wall features panel widths that can be as minimal as 976mm wide including inset pass doors, as opposed to the standard 1200mm wide for other moveable wall systems. It means that when the wall is not in position, it fits into a small pocket at the side of the room giving added discretion and improved aesthetics.
With an acoustic rating of 55dB Rw, one side of the room can be used as a refectory while on the other side teachers can host smaller assemblies, indoor activities or use the space for PE, music and dance classes uninterrupted. Alternatively, when the wall is not in position it offers one large open-plan area where staff can host large assemblies, parents’ evenings and other events.
The DORMA Variflex moveable wall is finished in a classic white melamine that complements the interior design of this chic, modern building.
“This is a great example of where we work very closely with both the contractor and the architect to meet very specific requirements,” said Julian Sargent, Style’s group managing director.
“Dawnus Construction were very clear that we needed to supply a moveable wall that had very thin panels, which is something that the DORMA Variflex features.
“This requirement was essential due to the very narrow stack niche at each end avoiding the structural steel uprights at the stack openings, making it an essential aspect of the installation and something we were pleased to adhere to.”

READY TO REDEFINE THE SOUND OF YOUR SPACE?

Talk to us about your acoustic goals — we’ll help you design a solution that sounds as good as it looks. 

2026 © Style Group

Subscribe to our newsletter

Zero-Joint Technology in the Healthcare Sector

NHS England’s Health Building Note 00-09 states clinical surfaces should be “impervious, designed for easy cleaning and free of fissures and unsealed joints.”
  • Laser-bonded, adhesive-free edge, with no seam or adhesive strip
  • Designed in line with the surface characteristics HBN 00-09 describes for clinical areas
  • Formaldehyde emissions tested significantly below the EU's REACH formaldehyde limit, in effect from 6 August 2026

Why it matters

HBN 00-09 sets out these surface characteristics because unsealed joints are a recognised place for moisture and micro-organisms to collect. A genuinely joint-free edge is designed to address that specific detail.

This is a surface and edge specification, not a clinical claim. Zero-joint technology has not been evaluated or certified by NHS England, and does not claim to reduce infection rates.

Zero-Joint Technology in the Hospitality Sector

Guest-facing spaces and food-service areas face frequent hygiene inspections and heavy daily use — seamless panels help simplify housekeeping and keep finishes looking newer for longer.
  • Seamless edge finish, with no visible transition between edge and panel surface
  • 100% adhesive-free construction — no hot-melt adhesive layer to fail
  • Edge processing on all four sides, built for daily commercial use
  • Low-maintenance and easy to clean

Why it matters

Food-service and guest-facing areas are typically inspected under hygiene and housekeeping standards that look closely at surfaces and joints. A seamless, moisture-resistant edge is designed with exactly that kind of scrutiny in mind.

Every one of these sectors shares the same underlying surface problem: a bonded-strip edge is a seam, and a seam is a place where dirt, moisture or wear can concentrate in a way a continuous surface can't. Zero-joint technology addresses that one structural detail across offices, schools, healthcare and hospitality settings alike — one construction detail, one shared weak point removed, four sectors that each care about it for their own reasons.

Zero-Joint Technology in the Education Sector

Classrooms and shared facilities see high daily footfall from children and staff, so partitioning needs to withstand daily wear and support fast, thorough cleaning.
  • Seamless, adhesive-free edge with no strip to lift or wear loose over time
  • Moisture-resistant, low-maintenance surface
  • Independently tested for VOC emissions to AgBB and EN 16516

Why it matters

Schools see some of the highest footfall of any building type relative to their size, and surface durability directly affects how long fittings stay presentable between refurbishment cycles. A seam-free edge that can't lift or peel with repeated impact and cleaning is a genuinely lower-maintenance fixture over the life of the building.

Zero-Joint Technology in the Corporate Sector

Open-plan offices and meeting suites see constant daily use — surfaces need to look sharp for years without high maintenance.
  • Seamless edge finish, with no visible transition between edge and panel surface
  • 100% adhesive-free construction — no hot-melt adhesive layer to fail
  • Edge processing on all four sides, built for daily commercial use
  • Low-maintenance and easy to clean

Why it matters

An adhesive seam is one of the few places on a standard partition edge where dust, spillage residue or cleaning-product build-up can collect, simply because it isn't a flat, continuous surface. Removing that seam removes that particular weak point — a lower-maintenance fixture designed to stay looking sharp for longer.

Prefer to Write?

Fill in the form below and we’ll get back to you within one working day.

Apply Now

Fill in the form below and we’ll get back to you within one working day.

    Book a CPD with us

    Fill in the form below and we'll get back to you as quickly as we can.

    Download pdf icon

    Download

    Would you like to be contacted?