Style group white
S icon
Corporate
|

Worcester Bosch

Formed in 1962 in Worcester, Worcester Bosch Group has had many transformations during its history, growing from a small engineering works to the market leader in boilers in the UK that it is today. Part of the Bosch Group, itsproducts and services are designed to improve the quality of life by providing solutions which are both innovative […]

SCROLL FOR MORE
https://style-group.co.uk/wp-content/uploads/1756/71/IMG-3505.webp https://style-group.co.uk/wp-content/uploads/1756/71/IMG-3504.webp https://style-group.co.uk/wp-content/uploads/1756/71/IMG-3516.webp https://style-group.co.uk/wp-content/uploads/1756/71/IMG-3518.webp https://style-group.co.uk/wp-content/uploads/1756/71/IMG-3471.webp https://style-group.co.uk/wp-content/uploads/1756/71/IMG-3472.webp

Worcester Bosch Enjoys Freedom to Create 5 Separate Training Rooms Thanks to Style

Formed in 1962 in Worcester, Worcester Bosch Group has had many transformations during its history, growing from a small engineering works to the market leader in boilers in the UK that it is today.
Part of the Bosch Group, itsproducts and services are designed to improve the quality of life by providing solutions which are both innovative and beneficial.
Working with architect, Corstorphine & Wright, and contractor, Speller Metcalfe, Style was specified to create wide-ranging flexibility in Worcester Bosch’s training and meeting area. This was not the first time Style had worked with this client, having previously installed a glass moveable wall in their reception area.
Choosing a semi-automatic Dorma Huppe Variflex moveable wall system as the best solution, Style installed four of these, evenly spaced in the expansive area so that smaller training and meeting rooms could be created to cater for different uses each day.
The outcome offered Worcester Bosch the flexibility to create 5 separate rooms, or several choices of different room configurations. For example, 2 larger training rooms, 2 smaller rooms and 1 large – or even open up the entire area for larger gatherings and conferences.
With impressive 57dB Rw acoustics, privacy was ensured at all times when the walls were in position, and the semi-automatic operation ensured the acoustic seals were applied to the correct pressure every time.
Applying a writeable, dry wipe magnetic white board finish meant the walls could also be used for note taking, brainstorming and training making this both a flexible solution and a very practical one too.
“We’re always delighted to be asked back to a client’s premises,” said Steve Williams, Style’s sales director for the Midlands, “and once again we were pleased to be working with Speller Metcalfe.
“The solution we installed offers Worcester Bosch such extensive flexibility and means they can make the very best use of their space during different times of the day, avoiding the need to hire training and meeting facilities externally.
“That’s the real beauty of a high quality moveable wall such as the Dorma Huppe Variflex. It’s so effortless to manoeuvre that you can adapt your room configurations for a variety of uses at a moment’s notice, and the acoustics are so breath-taking that you can run meetings or events either side of the wall undisturbed.”

READY TO REDEFINE THE SOUND OF YOUR SPACE?

Talk to us about your acoustic goals — we’ll help you design a solution that sounds as good as it looks. 

2026 © Style Group

Subscribe to our newsletter

Zero-Joint Technology in the Healthcare Sector

NHS England’s Health Building Note 00-09 states clinical surfaces should be “impervious, designed for easy cleaning and free of fissures and unsealed joints.”
  • Laser-bonded, adhesive-free edge, with no seam or adhesive strip
  • Designed in line with the surface characteristics HBN 00-09 describes for clinical areas
  • Formaldehyde emissions tested significantly below the EU's REACH formaldehyde limit, in effect from 6 August 2026

Why it matters

HBN 00-09 sets out these surface characteristics because unsealed joints are a recognised place for moisture and micro-organisms to collect. A genuinely joint-free edge is designed to address that specific detail.

This is a surface and edge specification, not a clinical claim. Zero-joint technology has not been evaluated or certified by NHS England, and does not claim to reduce infection rates.

Zero-Joint Technology in the Hospitality Sector

Guest-facing spaces and food-service areas face frequent hygiene inspections and heavy daily use — seamless panels help simplify housekeeping and keep finishes looking newer for longer.
  • Seamless edge finish, with no visible transition between edge and panel surface
  • 100% adhesive-free construction — no hot-melt adhesive layer to fail
  • Edge processing on all four sides, built for daily commercial use
  • Low-maintenance and easy to clean

Why it matters

Food-service and guest-facing areas are typically inspected under hygiene and housekeeping standards that look closely at surfaces and joints. A seamless, moisture-resistant edge is designed with exactly that kind of scrutiny in mind.

Every one of these sectors shares the same underlying surface problem: a bonded-strip edge is a seam, and a seam is a place where dirt, moisture or wear can concentrate in a way a continuous surface can't. Zero-joint technology addresses that one structural detail across offices, schools, healthcare and hospitality settings alike — one construction detail, one shared weak point removed, four sectors that each care about it for their own reasons.

Zero-Joint Technology in the Education Sector

Classrooms and shared facilities see high daily footfall from children and staff, so partitioning needs to withstand daily wear and support fast, thorough cleaning.
  • Seamless, adhesive-free edge with no strip to lift or wear loose over time
  • Moisture-resistant, low-maintenance surface
  • Independently tested for VOC emissions to AgBB and EN 16516

Why it matters

Schools see some of the highest footfall of any building type relative to their size, and surface durability directly affects how long fittings stay presentable between refurbishment cycles. A seam-free edge that can't lift or peel with repeated impact and cleaning is a genuinely lower-maintenance fixture over the life of the building.

Zero-Joint Technology in the Corporate Sector

Open-plan offices and meeting suites see constant daily use — surfaces need to look sharp for years without high maintenance.
  • Seamless edge finish, with no visible transition between edge and panel surface
  • 100% adhesive-free construction — no hot-melt adhesive layer to fail
  • Edge processing on all four sides, built for daily commercial use
  • Low-maintenance and easy to clean

Why it matters

An adhesive seam is one of the few places on a standard partition edge where dust, spillage residue or cleaning-product build-up can collect, simply because it isn't a flat, continuous surface. Removing that seam removes that particular weak point — a lower-maintenance fixture designed to stay looking sharp for longer.

Prefer to Write?

Fill in the form below and we’ll get back to you within one working day.

Apply Now

Fill in the form below and we’ll get back to you within one working day.

    Book a CPD with us

    Fill in the form below and we'll get back to you as quickly as we can.

    Download pdf icon

    Download

    Would you like to be contacted?