Style group white
S icon
Corporate
|
Movable Walls

Pavilion Court

Pavilion Court was built by McCarthy & Stone and is a purpose built development for retirement living. Situated on the sea front of the charming Edwardian seaside town of Felixstowe it consists of 46 one and two-bedroom retirement apartments for the over 60s. There is a House Manager on site and a 24-hour emergency call […]

SCROLL FOR MORE
https://style-group.co.uk/wp-content/uploads/1756/71/20200825-140702-SM.webp https://style-group.co.uk/wp-content/uploads/1756/71/20200825-140729-SM.webp https://style-group.co.uk/wp-content/uploads/1756/71/20200825-140658-SM.webp https://style-group.co.uk/wp-content/uploads/1756/71/20200825-140750-SM.webp https://style-group.co.uk/wp-content/uploads/1756/71/20200825-140826-SM.webp https://style-group.co.uk/wp-content/uploads/1756/71/20200825-140844-SM.webp https://style-group.co.uk/wp-content/uploads/1756/71/20200825-140902-SM.webp

Moveable Wall Offers Flexibility to Coastal Retirement Home

Pavilion Court was built by McCarthy & Stone and is a purpose built development for retirement living.

Situated on the sea front of the charming Edwardian seaside town of Felixstowe it consists of 46 one and two-bedroom retirement apartments for the over 60s. There is a House Manager on site and a 24-hour emergency call system provided via a personal pendant alarm and call points in the bathrooms and hallway.

Working directly with McCarthy & Stone, Style was asked to create flexible space in the lounge area by giving an open plan feel for general use, but with the freedom to partition off the space when quiet time was preferred.

To deliver this flexibility while retaining a light, open plan feel, Style installed a glass Stylefold moveable wall with a clean and stylish white frame.

With a 32dB acoustic rating this gives the room a quiet, relaxed ambiance when the wall is in place and the inclusion of a pass door also means the wall can remain in position while enabling ease of access by residents and staff.

“This is a simple yet effective solution for dividing space,” said Steve Williams, sales director for Style Midlands.

“The glass moveable wall not only maximises the light and airy feel of the room it also enables staff to check in on residents while passing and it allows residents to see how busy the lounge is without having to physically enter the room.

“Also, thanks to its clean, white styling the wall perfectly complements the interior design of the building making this a practical as well as an aesthetically pleasing feature.”

Stylefold is an easy to operate, flush acoustic moveable wall which can either be hung from a ceiling track or supported by a low profile surface mounted floor track.

With the option of choosing between solid panels or glass, it provides a simple and effective mechanism for creating adaptable space that can be reconfigured in seconds.

Style is the multi-award winning, UK market leader in moveable partitioning and folding wall systems offering solutions across multiple market sectors including corporate, hospitality, healthcare, education, local authority and religion. With the recent extension of its glass moveable wall range, Style is also forging into new markets including retail, shopping centres, airports, high rise winter gardens and banks.

READY TO REDEFINE THE SOUND OF YOUR SPACE?

Talk to us about your acoustic goals — we’ll help you design a solution that sounds as good as it looks. 

2026 © Style Group

Subscribe to our newsletter

Zero-Joint Technology in the Healthcare Sector

NHS England’s Health Building Note 00-09 states clinical surfaces should be “impervious, designed for easy cleaning and free of fissures and unsealed joints.”
  • Laser-bonded, adhesive-free edge, with no seam or adhesive strip
  • Designed in line with the surface characteristics HBN 00-09 describes for clinical areas
  • Formaldehyde emissions tested significantly below the EU's REACH formaldehyde limit, in effect from 6 August 2026

Why it matters

HBN 00-09 sets out these surface characteristics because unsealed joints are a recognised place for moisture and micro-organisms to collect. A genuinely joint-free edge is designed to address that specific detail.

This is a surface and edge specification, not a clinical claim. Zero-joint technology has not been evaluated or certified by NHS England, and does not claim to reduce infection rates.

Zero-Joint Technology in the Hospitality Sector

Guest-facing spaces and food-service areas face frequent hygiene inspections and heavy daily use — seamless panels help simplify housekeeping and keep finishes looking newer for longer.
  • Seamless edge finish, with no visible transition between edge and panel surface
  • 100% adhesive-free construction — no hot-melt adhesive layer to fail
  • Edge processing on all four sides, built for daily commercial use
  • Low-maintenance and easy to clean

Why it matters

Food-service and guest-facing areas are typically inspected under hygiene and housekeeping standards that look closely at surfaces and joints. A seamless, moisture-resistant edge is designed with exactly that kind of scrutiny in mind.

Every one of these sectors shares the same underlying surface problem: a bonded-strip edge is a seam, and a seam is a place where dirt, moisture or wear can concentrate in a way a continuous surface can't. Zero-joint technology addresses that one structural detail across offices, schools, healthcare and hospitality settings alike — one construction detail, one shared weak point removed, four sectors that each care about it for their own reasons.

Zero-Joint Technology in the Education Sector

Classrooms and shared facilities see high daily footfall from children and staff, so partitioning needs to withstand daily wear and support fast, thorough cleaning.
  • Seamless, adhesive-free edge with no strip to lift or wear loose over time
  • Moisture-resistant, low-maintenance surface
  • Independently tested for VOC emissions to AgBB and EN 16516

Why it matters

Schools see some of the highest footfall of any building type relative to their size, and surface durability directly affects how long fittings stay presentable between refurbishment cycles. A seam-free edge that can't lift or peel with repeated impact and cleaning is a genuinely lower-maintenance fixture over the life of the building.

Zero-Joint Technology in the Corporate Sector

Open-plan offices and meeting suites see constant daily use — surfaces need to look sharp for years without high maintenance.
  • Seamless edge finish, with no visible transition between edge and panel surface
  • 100% adhesive-free construction — no hot-melt adhesive layer to fail
  • Edge processing on all four sides, built for daily commercial use
  • Low-maintenance and easy to clean

Why it matters

An adhesive seam is one of the few places on a standard partition edge where dust, spillage residue or cleaning-product build-up can collect, simply because it isn't a flat, continuous surface. Removing that seam removes that particular weak point — a lower-maintenance fixture designed to stay looking sharp for longer.

Prefer to Write?

Fill in the form below and we’ll get back to you within one working day.

Apply Now

Fill in the form below and we’ll get back to you within one working day.

    Book a CPD with us

    Fill in the form below and we'll get back to you as quickly as we can.

    Download pdf icon

    Download

    Would you like to be contacted?