Style group white
S icon
Corporate
|
Skyfold Walls

Filshill

Deliveries are routed to match all their customer’s needs and are typically made within 24 hours of order, and their aim is to ensure that all customers have the correct stock so that they can run their own business as smoothly as possible.

SCROLL FOR MORE
https://style-group.co.uk/wp-content/uploads/1756/71/20240321-111827-1000pxl.webp https://style-group.co.uk/wp-content/uploads/1756/71/20240321-112145-1000pxl.webp https://style-group.co.uk/wp-content/uploads/1756/71/20240321-110651-1000pxl.webp https://style-group.co.uk/wp-content/uploads/1756/71/20240321-110216-1000pxl.webp https://style-group.co.uk/wp-content/uploads/1756/71/20240321-112404-1000pxl-wide.webp

Products

Skyfold

Location

Glasgow

Architect

C2 Concepts

Contractor

Clarks Contracts

Filshill in Scotland Chooses Skyfold to Divide Meeting Room

Filshill is a wholesale convenience business that delivers to over 1500 customers across Scotland and the North of England.

Deliveries are routed to match all their customer’s needs and are typically made within 24 hours of order, and their aim is to ensure that all customers have the correct stock so that they can run their own business as smoothly as possible.

Working with Clarks Contracts and Glasgow architects, C2 Concepts, Style was specified to install two Skyfolds to divide the meeting rooms at Filshill’s new distribution centre in Renfrew.

Skyfold is the highly innovative, vertically rising moveable wall which is discreetly housed in a ceiling cavity, therefore out of sight and taking up no floor space at all when not in use.

Descending gracefully at the push of a button, this fully automatic moveable wall has an impressive 51dB acoustic rating ensuring meetings can take place undisturbed either side.

By installing two Skyfolds, Style gave Filshill the flexibility to create three small meeting rooms, have one large and one small room or open up the whole area into a larger meeting space.

Thanks to the ease and speed by which the Skyfold can be lowered into position, the room configurations can be quickly changed depending on numbers during the day.

“The Skyfold moveable walls have made our flexible 3-2-1 meeting space a reality”, said Andrew Allison, business improvement manager at Filshill. “In fact, as well as being highly effective at dividing space they add a bit of ‘wow-factor’ to the room, especially when they descend into position from the ceiling.”

Angela McGowan, sales director for Style Scotland, added, “Skyfold is a very impressive automatic moveable wall. This meeting room is relatively small, however Skyfolds can be used in much larger areas too with high ceilings, making it a very versatile solution for creating flexible space, and as well as the corporate sector it has been extremely popular in schools, colleges and universities at dividing stepped lecture theatres into two separate rooms.”

Style is the exclusive UK partner to Skyfold, as well as for Dorma Huppe and SWG.

READY TO REDEFINE THE SOUND OF YOUR SPACE?

Talk to us about your acoustic goals — we’ll help you design a solution that sounds as good as it looks. 

2026 © Style Group

Subscribe to our newsletter

Zero-Joint Technology in the Healthcare Sector

NHS England’s Health Building Note 00-09 states clinical surfaces should be “impervious, designed for easy cleaning and free of fissures and unsealed joints.”
  • Laser-bonded, adhesive-free edge, with no seam or adhesive strip
  • Designed in line with the surface characteristics HBN 00-09 describes for clinical areas
  • Formaldehyde emissions tested significantly below the EU's REACH formaldehyde limit, in effect from 6 August 2026

Why it matters

HBN 00-09 sets out these surface characteristics because unsealed joints are a recognised place for moisture and micro-organisms to collect. A genuinely joint-free edge is designed to address that specific detail.

This is a surface and edge specification, not a clinical claim. Zero-joint technology has not been evaluated or certified by NHS England, and does not claim to reduce infection rates.

Zero-Joint Technology in the Hospitality Sector

Guest-facing spaces and food-service areas face frequent hygiene inspections and heavy daily use — seamless panels help simplify housekeeping and keep finishes looking newer for longer.
  • Seamless edge finish, with no visible transition between edge and panel surface
  • 100% adhesive-free construction — no hot-melt adhesive layer to fail
  • Edge processing on all four sides, built for daily commercial use
  • Low-maintenance and easy to clean

Why it matters

Food-service and guest-facing areas are typically inspected under hygiene and housekeeping standards that look closely at surfaces and joints. A seamless, moisture-resistant edge is designed with exactly that kind of scrutiny in mind.

Every one of these sectors shares the same underlying surface problem: a bonded-strip edge is a seam, and a seam is a place where dirt, moisture or wear can concentrate in a way a continuous surface can't. Zero-joint technology addresses that one structural detail across offices, schools, healthcare and hospitality settings alike — one construction detail, one shared weak point removed, four sectors that each care about it for their own reasons.

Zero-Joint Technology in the Education Sector

Classrooms and shared facilities see high daily footfall from children and staff, so partitioning needs to withstand daily wear and support fast, thorough cleaning.
  • Seamless, adhesive-free edge with no strip to lift or wear loose over time
  • Moisture-resistant, low-maintenance surface
  • Independently tested for VOC emissions to AgBB and EN 16516

Why it matters

Schools see some of the highest footfall of any building type relative to their size, and surface durability directly affects how long fittings stay presentable between refurbishment cycles. A seam-free edge that can't lift or peel with repeated impact and cleaning is a genuinely lower-maintenance fixture over the life of the building.

Zero-Joint Technology in the Corporate Sector

Open-plan offices and meeting suites see constant daily use — surfaces need to look sharp for years without high maintenance.
  • Seamless edge finish, with no visible transition between edge and panel surface
  • 100% adhesive-free construction — no hot-melt adhesive layer to fail
  • Edge processing on all four sides, built for daily commercial use
  • Low-maintenance and easy to clean

Why it matters

An adhesive seam is one of the few places on a standard partition edge where dust, spillage residue or cleaning-product build-up can collect, simply because it isn't a flat, continuous surface. Removing that seam removes that particular weak point — a lower-maintenance fixture designed to stay looking sharp for longer.

Prefer to Write?

Fill in the form below and we’ll get back to you within one working day.

Apply Now

Fill in the form below and we’ll get back to you within one working day.

    Book a CPD with us

    Fill in the form below and we'll get back to you as quickly as we can.

    Download pdf icon

    Download

    Would you like to be contacted?